Bafang DP E170.CAN / E180.CAN / E181.CAN code list · Bafang DP E170 / E180 / E181 Display

Error 43 on Bafang DP E170 / E180 / E181 Display

What it means + how to fix it From the manual

Quick answer

Error 43 on the Bafang E170 / E180 / E181 means “Total power from the battery cells is too high.” Most likely cause: a problem inside the battery or its management system. Try this first: restart the system first.

Try this first

Free, and each takes under 5 minutes.

Restart the system first
Switch off

In plain English

The battery's management system is reporting an internal problem. There's nothing you can safely check inside the battery. Switch off and let a shop test it.

Step-by-step checklist

Work from the top. Steps go from free and easy to shop jobs. Switch the bike off before touching any connector. Tick each step as you go. Your progress is saved on this device.

1Restart the system firstFree Bafang's manual says to restart first whenever an error code appears: switch the system off, wait a few seconds, then switch it back on. If the code doesn't go away, carry on with the steps below.
2Switch offFree Stop riding and switch the system off.
3Have the battery testedShop job A shop can test the battery and its protection circuit and tell you if it needs replacing. Never open the battery pack yourself.

Parts you might need

As an Amazon Associate I earn from qualifying purchases. These links go straight to Amazon.

Only buy a part if the free steps didn't fix it. Always match the voltage and connector type to your bike.

Replacement e-bike battery
Only if a shop confirms your battery is worn out or faulty. Must match voltage, mount and connector.
Link coming soon

Still not fixed?

Pages to try next:

When it's time for a shop: if you've worked through every step and the problem is still there, take the bike to an e-bike shop. Bring your notes on when it happens, plus the code.