Bafang C961 code list · Bafang C961 Display
Error 07 on Bafang C961 Display
What it means + how to fix it From the manual
Quick answer
Error 07 on the Bafang C961 means “Over voltage protection.” Most likely cause: a battery or charger whose voltage doesn't match the system, or a battery fault. Try this first: check the battery matches your system.
Try this first
Free, and each takes under 5 minutes.
In plain English
The system has measured a battery voltage above what the controller allows, and has shut down to protect itself.
Step-by-step checklist
Work from the top. Steps go from free and easy to shop jobs. Switch the bike off before touching any connector. Tick each step as you go. Your progress is saved on this device.
Parts you might need
As an Amazon Associate I earn from qualifying purchases. These links go straight to Amazon.
Only buy a part if the free steps didn't fix it. Always match the voltage and connector type to your bike.
- Link coming soon
Replacement e-bike charger
Only if your charger is faulty. Must match your battery's voltage and plug type exactly.
- Link coming soon
Replacement e-bike battery
Only if a shop confirms your battery is worn out or faulty. Must match voltage, mount and connector.
Still not fixed?
Pages to try next:
- How to Charge Your E-Bike Battery Safely
- E07 / 07 on other displays
- All Bafang C961 codes
- Battery not charging
When it's time for a shop: if you've worked through every step and the problem is still there, take the bike to an e-bike shop. Bring your notes on when it happens, plus the code.
Words on this page: Controller